How To Fix Windows Stuck On Shutting Down Screen Issue?

How To Fix Windows Stuck On Shutting Down Screen Issue?

Are you stuck in a never-ending cycle of your Windows computer shutting down and restarting, leading to an infinite loop? Have you been unable to access your data due to the computer being stuck on the Shutting Down screen? If so, this guide will provide some useful tips and tricks on how to fix the issue quickly and easily. We’ll cover several potential solutions that could help resolve this problem and get your computer back up and running in no time.

How To Fix Windows Stuck On Shutting Down Screen Issue?

What Causes the Windows Stuck on Shutting Down Issue?

The Windows shutting down issue is usually caused by a software conflict or a virus. It can also be triggered by a hardware malfunction, such as an overheating processor, failing hard drive, or corrupted registry. Sometimes, it may be due to a system update or driver installation gone wrong. But don’t worry, the issue might not be that critical. It may only be a minor software issue that is preventing your Windows PC from shutting down. However, if none of the solutions on this guide help, you might consult a Computer Service Professional to help you on the hardware side.

How To Fix Windows Stuck On Shutting Down Screen Issue?

Here are the fixes that are guaranteed to resolve your Windows stuck on shutting down screen issue. We recommend you go through all the fixes because that way you will be able to figure out that the problem is with the software or hardware.

Fix 1: Restart Your Computer in Safe Mode

One of the most effective solutions for fixing the Windows stuck on shutdown issue is restarting your computer in safe mode. Safe mode starts your computer with only basic files and drivers, which helps you identify any software conflicts that may be causing the problem. To start your computer in safe mode:

  1. Press and hold the Shift key on your keyboard while clicking the “Restart” button.
  2. This will open up a menu where you can select “Troubleshoot”.
  3. Select “Advanced Options” and then “Startup Settings”.
  4. You will see several options; choose “Enable Safe Mode”.
  5. Your computer will now boot into safe mode; check if the issue persists.

Fix 2: Run System Restore

Another way to fix this issue is to run System Restore to restore your computer to an earlier point in time when it was working properly. You can use this feature by clicking on the Start button, and searching System Restore or Reset this PC. In the next step, you will have to choose the restore point if you are using Windows 7.

If you are using Windows 10 or 11, you will have only two options whether to keep the files or remove everything. Choose the one that suits your need. However, removing everything will have more chances of fixing the issue because it will bring your PC to factory new condition.

Fix 3: Update Device Drivers

If Windows is stuck on Shutting down, and the above fixes haven’t helped you, you should try updating device drivers. Not all device drivers are at fault, you just need to update a few of them. For instance, look for the graphics driver as that can cause shutting-down issues. Also, the display driver can sometimes be at fault. Follow these steps to update device drivers:

  1. Right-click on the start button and click on Device Manager from the pop-up menu.
  2. In the device manager window, now expand Display Drivers and double-click on Nvidia or AMD, whatever you have.
  3. Check the version go to their official website to download the latest version.
  4. Install them following on-screen instructions.

Now when you restart your PC, your PC won’t get stuck on shutting down. If it is still happening, follow up with the next fix.

Fix 4: Run System File Checker

Sometimes, the system files get corrupt. In that case, you need to run the system file checker to fix the issue. Follow these steps to run the system file checker on Windows 10 or 11:

  1. Click on the Start button and type CMD.
  2. Now right-click on Command Prompt and click on Run as Administrator.
  3. In the command prompt window, type: sfc /scannow.
  4. Now the system file checker will start running, and this will take several minutes. It will restore all the corrupt files and fix them.

After this, you won’t have stuck on shutting down issue on your Windows PC.

Why Is My Windows PC Stuck On The Shutting Down Screen?

When your PC is stuck on the shutting down screen, it is usually caused by a software or hardware issue. This can be due to either a corrupt or missing system file, incompatible drivers, or an issue with the power supply.

The first step in troubleshooting this issue is to restart your computer and see if that corrects the problem. If that does not work, you may have to boot into safe mode and use system restore or repair tools to fix any corrupted files or drivers. If you are still having trouble, then you may need to check your power supply for any potential issues such as loose cables or bad capacitors. You may also want to make sure all of your drivers are up-to-date and compatible with your hardware.

If none of these steps help resolve the issue, then it is likely that there is a hardware issue causing the problem and you will need to take it in for repairs.

What To Do When Windows Is Stuck In Restarting Screen?

When Windows is stuck on the restarting screen, it can be a very frustrating issue to deal with. The cause of this problem can vary greatly, but there are some steps you can take to troubleshoot and potentially fix the issue.

The first step is to try and figure out what caused the computer to get stuck in the restarting screen in the first place. Check to see if any recent updates have been installed or if any changes were made to the system that could have caused a conflict. If possible, try booting into Safe Mode as this will allow you to access troubleshooting options that may help resolve your issue.

If these initial attempts don’t work, you may need to perform a system reset or reinstall Windows entirely. This can be done from within Windows itself by accessing Advanced Startup Options or from a recovery disc or USB drive if needed. Keep in mind that doing either of these will erase all of your data, so be sure you have backed up any important documents or files before proceeding.

How Do I Fix Windows 11 Stuck On Shutting Down Screen?

If you are experiencing a Windows 11 stuck on shutting down screen, then there are a few steps you can take to fix the issue.

The first step is to restart your computer. This will often resolve the issue if it is caused by an application or process that is preventing your computer from shutting down correctly. To do this, press and hold the power button until your computer shuts off, then press it again to turn it back on. If this does not work, then proceed to the next step.

The second step is to use System Restore. System Restore allows you to return your computer’s operating system to an earlier state before any problems occur.

To use System Restore (Windows 7), go to “Start > All Programs > Accessories > System Tools” and select “System Restore” from the list of options. Follow the onscreen instructions and select a restore point before any issues begin with your computer. Once completed, restart your computer and see if this resolves the issue with Windows 11 stuck on shut down screen.

If you are using Windows 10 or 11, you only have the option to reset your PC and you can do that by simply search Reset this PC and following on-screen instructions.

How Do I Fix Windows Is Not Shutting Down Properly?

If you are experiencing issues with Windows not shutting down properly, there are a few steps you can take to try and fix the problem.

The first step is to check for any pending updates that need to be installed. Some Windows updates will address shutdown issues, so make sure all available updates have been installed. You should also check for any recently installed programs or software that may be causing the issue. Uninstall them if necessary and then try restarting your computer again to see if this resolves the issue.

Another thing you can do is scan and repair any corrupted system files using the built-in System File Checker tool in any Windows PC. This tool scans your computer for any missing or corrupted system files, and attempts to repair them. To use this tool, open an elevated Command Prompt window by right-clicking on the Start button and selecting Command Prompt (Admin). Type sfc /scannow into the box, wait for the scan to complete, and then restart your computer after it has finished scanning and repairing any files it detected as damaged or missing.

Finally, if all else fails you may need to perform a clean installation of Windows from scratch. This should address any underlying issues that were causing Windows not shut down properly in the first place. Be sure to back up your data before performing a clean installation of Windows in case anything goes wrong during the process!

What Happens If Your PC Doesn’t Shut Down Properly?

If your PC doesn’t shut down properly, it can cause a variety of issues. This is especially true if the computer has been running for an extended period of time and the system has not been restarted. When this happens, the operating system may become unstable and lead to a number of problems like slow performance, freezing, and even data loss.

To avoid this situation, it is best to regularly shut down your PC in a proper manner. You should always make sure that all applications are closed before attempting to shut down or restart your computer. If you are using Windows, you can use the Shut Down option from the Start Menu or press Ctrl+Alt+Del then select Shut Down from there. Additionally, you should allow enough time for any pending updates or installations to finish before shutting down. Doing so will ensure that your computer shuts down properly and avoids potential issues that could arise from an improper shutdown.

The Bottom Line

The Windows Stuck on Shutting Down Screen Issue can be a frustrating problem to deal with. However, by following the simple steps outlined in this article, you should be able to quickly and easily resolve the issue. Using Command Prompt to run SFC and DISM commands, restarting Windows Explorer, or performing a clean boot of your computer may help you fix the issue.

If all else fails, then reinstalling Windows is an option that users may consider if none of the other fixes work. Ultimately, by troubleshooting and trying different methods, you should be able to identify which solution works for you and get your computer back up and running again as soon as possible!

Posted by
Noah Aronofsky

I’m a freelance content writer who (surprise!) kind of has a thing for tech. When I’m not working on guides for Techphr or Make Tech Quick, you can probably find me somewhere in Teyvat, Novigrad, or Whiterun. Unless I’m feeling competitive, in which case you should try Erangel.

Leave a Reply

Your email address will not be published. Required fields are marked *